"Spectacular fire in motion"

Latest News »

Equipment

16 channel wireless firing system

This system adopts advanced remote control technique and has the following characters: safety, reliance, strong interference resistance, easy-operating, etc. It is a an ideal tool for  remotely controlling the firing of the fireworks.  This system has the option to control either one receiver by one remote control or else many receivers by one controller using the same frequency.

1.  This system consists of a remote control and a remote firing receiver. It controls 16 channels of fireworks and the distance for remote control is over 100 meters.

2.  Each channel can remotely control five electric ignitors when connected in series.

3. Its operation is very simple and easy.

4. This device provides each channel with fire test LEDs, as well as Continuity test LEDs.  This allows you to test all 3 firing functions, and even practice fire w/o actually using igniters or pyrotechnic devices.  Just watch the LED light up, showing when an Ematch would fire.

5. This system 4 different modes:

:: POINT mode:- You can ignite any channel you want by selecting the corresponding channel number on the remote and pressing it. 

:: STEP mode:- Step firing allows you to fire each cue, in order from 1-16 without paying attention the coordinating number on the transmitter.  If you are sure you will be firing the cues in numerical order, in a short period of time, you can simply do so by only using the button on your transmitter labeled “STEP”.

:: ALL mode. This function allows you to fire all the channels that are connected with a device.  It will simultaneously fire all 16 channels.  It is typically used water fall effects and on display fireworks finales when multiple shells will fire together. 

:: CONTINUED STEPPING mode. Program stepping is a very popular way of firing.  It allows you to fire up to 16 cues with a pre-programmed amount of time between each cue, with the push of one button.  The red buttons below the screen showing “00.0” are your STEP TIME PROGRAM controls.  You can program the effects to fire anywhere from 0.1 seconds apart, to 99.9 seconds apart.  If you want the effects to fire with 0.3 seconds between each other, you simply push the 0.1S button 3 times.